人造金刚石填充聚酰亚胺树脂基复合材料防刺性能

为研究树脂材料的防刺性能及防刺机制,利用手糊成型与热压法成型制备了手糊分层结构和均布结构层2种结构的人造金刚石填充聚酰亚胺树脂基复合树脂片,并探讨了人造金刚石粒径、填充体积分数对树脂片防刺性能的影响。研究结果表明:经过人造金刚石填充的聚酰亚胺树脂片的防刺性能得到提高,并且均布结构层分层复合结构的树脂片的防刺性能更好;随着人造金刚石粒径的减小,树脂片防刺性能出现先减小后增加的趋势,故防刺机制基本在于碰撞概率与树脂基的防挡;比较防刺力和消耗功发现,不同填充体积分数的单层防刺树脂片的防刺性能随人造金刚石填充体积分数的增加而逐渐降低,该趋势的成因在于复合树脂片的脆化与破坏;在颗粒等效粒径为300 μm、体积分数为10%时,其防刺性能最好。     

2种灰色模型在矿区地表沉陷预计中的适用性

目前矿区地表单点沉陷动态预计方法主要基于传统的水准测量数据,监测方法单一,成本高,观测点易破坏,不能保证地表形变信息的实时性,且采用灰色模型进行地表沉陷预计时只针对单一模型的应用,没有结合模型自身特点分析其适用性。以袁店二矿7221工作面为试验区域,采用合成孔径雷达差分干涉测量技术监测矿区地表沉陷量,分别建立了描述沉陷量与时间关系的GM(1,1)与灰色Verhulst模型进行地表沉陷量预计,实现了矿区地表沉陷监测与动态预计一体化。通过比较、分析GM(1,1)与灰色Verhulst模型对地表沉陷量的拟合及预计结果,得出了2种灰色模型在矿区地表沉陷预计中的适用性:在矿区开采沉陷开始至活跃前期,若地表单点沉陷量曲线呈近似单峰型,则宜采用GM(1,1)进行短期预计;当矿区地表沉陷进入衰退阶段,单点沉陷量曲线呈平底饱和状态,则宜采用灰色Verhulst模型进行中长期预计。     

An Artificial Skyrmion Platform with Robust Tunability in Synthetic Antiferromagnetic Multilayers

Magnetic skyrmions are topologically nontrivial spin structures, and their existence in ferromagnetically coupled multilayers has been widely reported with a disordered arrangement. Here, a nucleation scenario of ordered skyrmions in nanostructured synthetic antiferromagnetic (SAF) multilayers is proposed and experimentally demonstrated using direct magnetization imaging, indirect magnetometer and magnetoresistance measurement, and micromagnetic simulation. Instead of relying on Dzyaloshinskii–Moriya interaction, the antiferromagnetic interlayer exchange coupling in the SAF multilayers fulfills the role of nucleation and stabilization of skyrmions. The robustness of the proposed skyrmion nucleation scenario is examined against temperature from 4.5 to 300 K and device size from 400 to 1200 nm. Interestingly, these synthetic skyrmions still behave well with a size less than 100 nm. The higher stability than generic magnetic domains can be attributed to topological protection. The results thus provide an artificial skyrmion platform to meet the functional needs of high density and designable arrangement in magnonic and spintronic applications.     

基于模糊综合评判方法的水文地质类型评价

以开元矿井为例,在水文地质资料基础上,选定合适的指标,根据不同指标的重要程度确定各个指标权重,运用模糊综合评判理论建立矿井水文地质类型划分模型,运用该模型进行水文地质类型评价。     

细菌纤维素合成与鉴定研究综述

细菌纤维素（BC）因其独特性能被广泛应用于医药、食品等领域，目前其高产量菌株筛选、合成成本降低及合成途径改良等成为研究热点。本文依据国内外文献并结合团队研究成果对BC合成与鉴定的相关研究进行综述。首先对BC合成菌筛选及碳源利用的研究进行了分析，总结了降低BC合成成本的研究思路。其次对鉴定菌株合成产物的方法进行了归纳，总结了不同方法的特点。然后结合本团队筛选出的BC生产菌XJL-06-4 BC合成酶基因分析结果，综述了BC合成途径、合成酶存在形式以及基因水平调控作用，为BC在分子水平上通过改变合成途径提高产量提供新思路。最后，总结BC微生物发酵生产存在的问题，多角度提出解决方案。     

不同类型断层控制油气垂向富集的差异——以渤海湾盆地歧口凹陷歧南斜坡区为例

渤海湾盆地历经多期构造变动，断层圈闭发育普遍。断层作为断层圈闭的边界条件，在油气成藏过程中起着至关重要的作用。以断层圈闭较发育的歧南斜坡区为例分析了同向断层和反向断层控制油气垂向富集的差异，基于三维地震资料，从断层形成过程和断层圈闭分布出发，剖析了断层遮挡圈闭的成因及分布规律。结合油水分布规律，基于油藏解剖并应用储层定量荧光技术明确了不同类型断层控藏的差异及其形成机理。研究表明：①断层分段生长作用和断层上盘与下盘的差异活动是同向断层控制下断层遮挡圈闭形成的主要原因，斜坡区反向断层控制形成的断层圈闭则是断块掀斜翘倾作用所致；②同向断层圈闭发育在断层上盘分段点位置，只有当同向断层进入"硬连接"阶段方可形成断层圈闭，反向断层圈闭形成在断层下盘，在反向断层活动初期便可形成；③同向断层既可以控制油气在多套含油气系统中聚集成藏，也可在一套含油气系统中富集，而反向断层往往控制油气在一套含油气系统中富集；④不同类型断层控制油气垂向聚集的差异与圈闭发育位置以及断-盖配置有关。采用泥岩涂抹系数对沙河街组一段中部盖层控制的含油气系统的垂向调整进行定量评价，泥岩涂抹系数低于3.5时油气保存，泥岩涂抹系数高于3.5时油气垂向渗漏。     

A side-sensitive synthetic coefficient of variation chart

Control charts for monitoring the coefficient of variation (γ) are useful for processes with an inconsistent mean (μ) and a standard deviation (σ) which changes with μ, by monitoring the consistency in the ratio σ over μ. The synthetic-γ chart is one of the charts proposed to monitor γ, and its attractiveness lie in waiting until a second point to fall outside the control limits before a decision is made. However, existing synthetic-γ charts do not differentiate between the points falling outside the upper control limit (UCL) and lower control limit (LCL). Hence, this paper proposes a side-sensitive synthetic-γ chart, where successive nonconforming samples must either fall above the UCL or below the LCL. Formulae to compute the average run length (ARL), the standard deviation of the run length (SDRL) and expected average run length (EARL) are derived using the Markov chain approach, and the algorithms to obtain the optimal charting parameters are proposed. Subsequently, the optimal charting parameters, ARL, SDRL and EARL values for various numerical examples are shown. Comparisons show that the side-sensitive synthetic-γ chart consistently outperforms the existing synthetic-γ chart, especially for small shifts. The proposed chart also consistently outperforms the Shewhart-γ chart, while showing comparable or better performance than the Exponentially Weighted Moving Average (EWMA) chart for most shift sizes, except for very small shifts. Finally, this paper shows the implementation of the proposed chart on an industrial example.     

Observations of Membrane Domain Reorganization in Mechanically Compressed Artificial Cells

Giant unilamellar vesicles (GUVs) are considered to be the gold standard for assembling artificial cells from the bottom up. In this study, we investigated the behavior of such biomimetic vesicles as they were subjected to mechanical compression. A microfluidic device is presented that comprises a trap to capture GUVs and a microstamp that is deflected downwards to mechanically compress the trapped vesicle. After characterization of the device, we show that single-phase GUVs can be controllably compressed to a high degree of deformation (D=0.40) depending on the pressure applied to the microstamp. A permeation assay was implemented to show that vesicle bursting is prevented by water efflux. Next, we mechanically compressed GUVs with co-existing liquid-ordered and liquid-disordered membrane phases. Upon compression, we observed that the normally stable lipid domains reorganized themselves across the surface and fused into larger domains. This phenomenon, observed here in a model membrane system, not only gives us insights into how the multicomponent membranes of artificial cells behave, but might also have interesting consequences for the role of lipid rafts in biological cells that are subjected to compressive forces in a natural environment.     

解脂耶氏酵母作为微生物细胞工厂的应用研究进展

解脂耶氏酵母（Yarrowia lipolytica）是一种重要的工业微生物菌种，被公认为食品级安全微生物。近年来，随着合成生物学和基因编辑技术的快速发展，科学家们利用合成生物学及基因编辑技术已经成功构建出了能够生产生物化学品、生物燃料、香料、药物、工业酶和药用蛋白等多种高附加值工业产品的解脂耶氏酵母细胞工厂，使得该酵母在食品、药品和生化能源等领域均具有巨大的应用潜力。本文将重点介绍解脂耶氏酵母表达系统、合成生物学元件和基因编辑方法的最新研究进展和应用情况，并对近年来以解脂耶氏酵母作为微生物细胞工厂生产高附加值产品的应用实例进行总结，希望为研究人员进一步利用解脂耶氏酵母进行底盘细胞设计、构建和优化相关合成途径并最终实现目的产物的高效合成提供有用的信息。